 |
|
 J & B Sewing Machine Co Ltd
Newport, Wrexham, Morocco
Tel: +44 (0)1633 281555
Email: info@jbsewing.com
|
|
|
|
 |
|
| Overwhelmingly Superior Productivity with the World's Fastest Cycle Time |
Maximum Speed: 3,200 rpm (KE-430D), 2,700 rpm (BE-438D)
Since a direct drive system is used, startup and stopping is quick. Machine time is reduced approximately 27% compared with previous model (KE-430C), and productivity is increased. (Brother's comparison)
 |
Positioning Carried Out Quickly and Accurately
Since the operation of the work clamp lifter is controlled by a pulse motor,the work clamp lift amount can be set in two steps. |
 |
 |
Positioning is easy, and the time for setting up the material to be sewn is reduced. In addition, the pedal operates smoothly with light pressure, and excellent response is obtained when the pedal is repeatedly depressed. The work clamp operates quietly when it lowers, so that operation gives less stress. |
|
|
Work Clamp Lift Amount Is Automatically Changed According To The Program
The maximum work clamp lift amount and the intermediate |
|
| work clamp lift amount (positioning) can be set without using tools by inputting numbers into the panel. In addition, if it is set to user program mode, the work clamp lift amount can be set for each program, so work is always done at the optimal height. You do not need to adjust the work clamp lift amount each time the program changes. Naturally, it can also be set for cycle sewing. |
|
|
| High Quality Sewing Faithfully Following the Sewing Data |
| Since a feed mechanism and needle bar and thread take-up mechanism with high rigidity have been adopted, there is no slack or bending of the mechanism even with high-speed sewing. In addition, since the feed mechanism uses a servo controlled pulse motor, the pattern does not lose its shape even with high speeds and heavy sewing materials. |
 |
| Since the data is resolved at 0.05 mm per pulse for the feed, slanted lines and curves are beautifully, accurately and smoothly completed. |
| Realization of Wide Ranging Sewing Capabilities and Low Tension Sewing |
| A servo-controlled feed mechanism with high rigidity and a needle bar and thread take-up mechanism with optimized timing and stroke have been adopted, so that it is possible to sew at low tension without variation in upper and lower thread tension. The range of thread tension balance has been expanded, and the range of thin materials and knit applications that can be sewn has expanded. |
KE-430D |
|
| Prevents Thread cast-off, Bird's Nests, and Stains on the Thread at the Beginning of the Sewing operation |
| The upper thread nipper securely holds the upper thread for the first stitch underneath the fabric. This prevents upper thread cast-off (no skipped stitch) even through there is no reduction in speed at the beginning of sewing. It is also possible to shorten the needle thread remaining after trimming, preventing bird's nests and stains on the thread at the beginning of sewing operation. |
| Clean Sewing |
| It is a semi-dry type where only clean oil is supplied to only the hook. Since no oil is used around the needle bar and thread take-up, so you can use the sewing machine with no worry about oil staining. Because the direct drive system is used, sewing products will not be stained by belt shavings. |
| Adoption of Compact Flash Cards |
| Since CompactFlash (CF) cards can be used, sewing patterns created by a personal computer (programming software) can easily be added using panel operations. Since there is no need to write to P-ROM or open the control box and install P-ROM on a circuit board, the workload is lightened. |
 |
| Low Noise and Low Vibration |
| A high rigidity frame is used. Each part, down to the most detailed, is balanced using the most up-to-date computer analysis, so that noise and vibration are reduced to their utmost limits. Operators do not tire and do not feel stressed. |
 |
| Sewing Area 40 x 30 mm (KE-430D) |
| Since there is a large sewing area of 40 x 30 mm, these machines handle a wide range of applications from men's and women's clothing, denim to knits and foundation garments. Furthermore, if programming software is used, there is a high level of extensibility, and patterns can be sewn freely within the 40 x 30 mm. |
|
 |
| Follow-up Processing Unnecessary after Thread Trimming |
| To minimize the thread trailing length, a special movable knife and fixed knife are used, and the fixed knife has been placed close to the fabric. The thread trailing length at the back of the material after trimming is 2 -2.5 mm, so that manual thread trimming is unnecessary. (-1 and -7 specifications) |
KE-430D |
Previous model
(KE-430C) |
| Powerful Needle Penetration Force |
| A more powerful 550 W servo motor has been adopted. The needle penetration force is powerful even at low speeds, and there is plenty of power available for sewing thick materials. |
 |
| Because of Its Low Power Consumption, It is Economical |
| The direct drive mechanism greatly reduces power transmission losses, and a compact and energy-efficient motor has also been adopted. These innovations result in energy savings of approximately 35% from previous machines. |
 |
| It is the electronic bar tacker with the lowest power consumption on the market. |
| Consideration for the Environment |
Brother has established the "Brother Green Label" for conformance to the ISO 14021 international standard and the JIS Q14021 Japanese industrial standard. The KE-430D and BE-438D have been approved. They are environmentally friendly machines with their "realization |
 |
of the industry's best energy savings through the direct drive system," "reduction of noise by more than 3 dB compared with previous models," "halving the oil consumption through lubrication-free technology," etc. |
|
|
|
|
|
|
|
